
Running Cisterns
The outlet valve seals the flush, and once it wears the cistern never holds, so we fit a quality replacement valve and reset the water level to stop the trickle.
Plumber Wilston handles toilet repairs across Wilston and the streets around it: running cisterns, leaks at the base, valves that will not shut off and full pan replacements. Licensed plumbing and gasfitting under QBCC No: 15024607, and a fixed quote before any work starts.
If we're late, $100 comes off your bill

A toilet is one fixture with a handful of moving parts, and nearly every fault comes back to one of them. Cisterns from the interwar building era still sit in bathrooms across the slopes toward Eildon Hill, and their internals have usually been patched more than once.
What shapes the job here:
From a dripping inlet to a full replacement, this is the range:

The outlet valve seals the flush, and once it wears the cistern never holds, so we fit a quality replacement valve and reset the water level to stop the trickle.

The inlet valve governs the refill, the outlet valve holds the flush water, and we carry replacements for both, matched to the cistern's brand and internal layout.

Water seeping from under the pan usually means a failed pan collar or seal, so we pull the pan where needed and renew the connection to the drain properly.

When a pan cracks or a cistern cannot be matched, we remove the old suite, fit the new one and reconnect it to the existing drain and supply.

A button that jams in or a lever that moves without flushing has usually snapped its internal link, and we swap the mechanism instead of charging you for a whole new suite.

Loose seats, corroded bolts and cracked fittings get sorted in the same visit, so the whole suite leaves the job complete rather than half finished and waiting on a second booking.
$0 call-out fees, available 24/7, and same-day where we can.

The cistern keeps trickling into the pan long after flushing, which points to a worn outlet valve or a float set too high, and either is a one-visit fix.
A flush that barely moves the water means the outlet valve is not lifting fully or the cistern is under-filling, and testing the mechanism narrows it down quickly.
A damp patch around the pan's foot that returns after mopping is usually the seal between pan and drain, and leaving it alone lets water soak into flooring that then swells.
A toilet that refills by itself every so often is letting water leak past the outlet valve slowly, and the valve swap that stops it takes under an hour.

A worn outlet valve lets water run into the pan without stopping, and the meter counts every litre of it. A valve repair is one of the smaller bills in the trade measured against the waste it stops.
A leaking pan seal soaks into flooring slowly, and in the townhouse rows near St Columba's Primary School the water finds the unit below before the owner above notices. Early repairs stay small.
Flimsy valves fail fast, especially where a scaled supply line makes the inlet work harder. We fit quality components so the repair holds.

Call (07) 3524 7117 and walk us through what's going on in Wilston. A couple of quick questions help us bring the right parts the first time.

You see flat-rate pricing with no hidden fees before the work begins. Say yes and we start.

The toilet's stop tap gets turned off, the cistern comes apart, and we test the inlet, outlet and supply flow to confirm which part has failed before anything is replaced.

Card or EFTPOS on site once the job's finished, or ask about Fix now, pay later.

Every toilet job ends with the cistern set to the right level and the flush tested a few times to be sure.
Every Wilston job comes with $0 call-out fees, and there's no extra cost for nights, weekends or public holidays.

We stand behind the work with our Fix-It-or-It's-Free guarantee (T&Cs apply), and if we're late, $100 comes off your bill.
Under QBCC No: 15024607, every job is done by a licensed plumber, and our labour carries a lifetime labour warranty.
We're licensed and insured, locally owned and operated, with flat-rate pricing.
Our run covers Wilston plus Grange, Lutwyche, Windsor, Bowen Hills and Herston, from the station corridor across to the creek-side streets, and the same plumbers who fix a running cistern here also handle tap repairs and bathroom plumbing on the same visit.
Usually the outlet valve or the inlet washer has worn out, so the cistern never seals and keeps topping up, and we swap the tired part for a quality replacement on the spot.
It can, because a worn outlet valve trickles water into the pan nonstop and every litre registers on the meter, so a one-visit repair often pays for itself on the next bill.
No, because Urban Utilities looks after the street mains and public sewer, while the cistern, pan and every pipe on your side of the connection belong to you, which is where we come in.
They can be, because some still draw through scaled galvanised supply pipe and carry old high-level cisterns whose internals are hard to match, so we test the flow first and fit modern equivalents.
Mostly the suite and what has failed, because a valve swap on a standard cistern is quick work, while a pan sealed into an older floor or a tired supply line adds time and materials.
Call (07) 3524 7117, tell us what the toilet is doing and when it started, and you get a fixed quote before any work starts in Wilston, with same-day where we can.
Call (07) 3524 7117 and tell us what's going on. We're available 24/7, every job in Wilston comes with $0 call-out fees and flat-rate pricing, and the work is done under QBCC No: 15024607, with same-day where we can.
For the wider fixture range, the plumbing services page lists every job we handle, and a pan that is overflowing right now belongs on the toilet overflowing emergency page instead.
To claim your $0 call-out fee, call (07) 3524 7117 today.